Mitsubishi Heavy Industries floor & console · supplied & fitted
MHI Floor-standing, fitted in your home.
Twin air outlets in a low-level unit, ideal where wall space is limited. We size the system for your room and fit it, so it works from day one.
- Sizing for your room, confirmed before installation
- Indoor and outdoor units, pipework and connections fitted
- Set up, tested and explained on the day
- Servicing and repairs when you need them
How it works
From first call to comfortable rooms
We call you back
We talk through the room, the wall and where the outdoor unit could go.
Your quote
The exact model, the work involved and the price, in writing.
Installation day
We fit both units, test the system and tidy up as we go.
Aftercare
We show you the controls, and we’re here for servicing and repairs.
Try it in your space
Try a system in your room.
Your room preview
Upload your photo, then drag or tap to position the unit.
Drag the two yellow circles to each end of something you can measure: the wall, a door or a window.
A visual guide: sizes are as accurate as your measurement. Use arrow keys for fine positioning; hold Shift for larger moves. We confirm the position, clearances and pipework before installation. Concealed/cassette systems need a different visual approach.
From specification to everyday life
Features and everyday benefits
Made for low walls
A floor-standing unit for rooms without a good high wall, such as conservatories and rooms with sloping ceilings.
Twin air outlets
Two air outlets balance the direction and volume of air, so it spreads more evenly around the room.
Allergen filters
Allergen filters are built in, and every size is rated A++ for cooling.
Technical details
Models and specifications
For comparing the figures. You don’t need to choose a model: we confirm the right one before installation.
| Selected indoor / system model | SRF25ZS-W / SRC25ZS-W2 |
|---|---|
| Rated cooling / heating capacity | 2.5 / 2.9 kW |
| Cooling / heating energy class (average climate) | A++ / A+ |
| SEER / SCOP (average climate) | 7.40 / 4.00 |
| Indoor cooling sound pressure (low → high) | 25 / 29 / 32 / 38 dB(A) |
| Indoor dimensions (width × height × depth) | 860 × 600 × 238 mm |
| Rated cooling electrical input | 0.59 kW |
| Heating capacity at −7°C | Not listed |
Source: MHIAE specification for the named indoor/outdoor pair. Indoor sound pressure depends on fan mode and test conditions; sound power is a different measurement. Other models in the family can have different ratings.
Capacity ≠ electricity use
Cooling output describes the heat the system can remove. Electrical input is the power it consumes under specified test conditions.
SEER & SCOP
Seasonal efficiency measures cooling and heating performance over a defined season. Real use depends on your room and settings.
Compare the whole system
The indoor unit, outdoor unit and installation configuration determine the final performance. Ask about heating output in colder weather.
Make the numbers useful
Estimate running costs
At the input you enter
per day
Input × hours × tariff. Assumes constant electrical input; inverter systems vary their output and draw. This is an illustration, not a bill forecast or savings claim. The tariff is editable and is not a current market quote.
A rough guide
Room-size guide
A rough starting point from the room’s size and conditions, matched to this range’s rated capacities. It isn’t a heat-load calculation: we confirm the right size before installation.
More glass, stronger sunshine and weaker insulation can increase the cooling requirement.
Confidence before you commit
Product questions
Will this heat my room as well as cool it?
These are heating and cooling systems. Your engineer checks the heating requirement and performance at the relevant outdoor temperature before specifying it as a heating solution.
Can I leave it running all day?
Yes. These are inverter systems: once the room reaches the temperature you set, the compressor slows right down instead of switching on and off, so they are designed to run for long periods. A steady setting usually uses less energy than big changes or switching off and on. Running all day still costs more than running only when you need it, so use the timer, or a slightly higher setting for cooling and lower for heating, when the room is empty. Your model’s manual has its own guidance.
What is included in an installed quote?
Ask for the indoor and outdoor models, installation work, pipe route, drainage, electrical requirements, commissioning, controls handover and any exclusions. Belfast Cooling confirms the exact scope before installation.
Can I connect more than one room?
Some indoor units support multi-split combinations, subject to the outdoor unit schedule. The MHI ZT-W range is currently not multi-split compatible. A whole-home plan needs each room’s load assessed.
What warranty and maintenance will I receive?
Warranty terms depend on the supplied product, installer arrangements and servicing requirements. Request written parts, labour and maintenance terms with your quote; no unverified duration is promised here.
How realistic is the room preview?
It places a product image over your photograph. You control the size, angle and location. It is not automatic 3D rendering, calibrated AR or an installation suitability check.
How do I care for the system?
Follow the exact model’s manual for user filter care and book professional servicing as recommended. Keep airflow paths clear and ask the installer to demonstrate the controls at handover.
Manufacturer information & downloads
Specifications come from MHI Air-Conditioning Europe data sheets for each indoor/outdoor pair (checked 14 October 2026). Range facts use MHI’s UK range page.
Ready to see it on your wall?
Tell us about your room and our team will get back to you.
